Waxes for cross-country skiing
There are a wide variety of waxes for Nordic Skiing. The waxes can be classified into four main categories: glide waxes, kick waxes, klisters and waxtapes.
Glide wax
Glide waxes are used to make a ski glide faster, and are applied by ironing onto the ski. Glide waxes range widely in price, depending on quality; racing waxes can be very expensive, over $200 per pair at the national level. They are generally in the form of blocks, though they can be found as powders or liquids. Glide waxes are applied outside the kick zone of classic skis, or to the full length of skate skis. They are the only type of wax used on skating skis.
Kick wax
The purpose of kick wax is to provide grip on snow when weight is transferred on a ski; they are used on classic skis only. Kick waxes are applied in the kick zone of classic skis if the ski is not a fish-scale, waxless ski.
Kick waxes are classified according to their hardness: harder waxes are for colder and newer snow. Using a wax that is too hard will not give sufficient grip, while wax that is too soft will cause the formation of an ice sole that slows the skier down. It is not uncommon to apply a new layer of wax if the weather changes, or when moving in altitude.
Difficulty of choosing correct kick waxes to different conditions is nowadays greatly reduced by grip wax tapes, which have a wide temperature range, and are easily applied to the ski bottom. Although these are not used by competitors, who prefer the optimum waxing, they have proven to be quite suitable for fitness and recreational purposes. Many high-level competitive teams have ski tuners whose job is to apply the ideal wax combinations for the conditions.
Kick waxes generate grip by penetrating into the snowflakes when the skier puts his weight on the ski. Colder snowflakes are harder, and so is newly fallen snow. The most appropriate wax is the one that is soft enough to generate grip, but also hard enough not to accumulate snow and create a sole.
Waxes are usually colour-coded by usage temperature: the most common are red for above 0˚C, and blue for below. There are many other colours for more specific temperature ranges, for instance violet for around 0˚C, green for below -10˚C, and white for below -15˚C. The snow-temperature range given by the producer must be taken with a grain of salt, since new snow will require a harder wax.
Guessing the right hardness can be quite difficult, and the varying condition of the snow can make the right choice wrong after a few hundred metres. Furthermore, the snow in the beaten track is usually much different from the one immediately surrounding it, and works best with a softer wax. If skis are poorly tuned, sometimes the skier can solve thin snow soles caused by a soft wax by beating the ski on the track after kicking; the opposite problem may be handled by skating.
Klister
As the snow becomes older and snow flakes lose their sharpness, in case of re-freezing or of water, kick wax cannot provide any more grip, and it becomes useless. One must therefore resort to klister, which is basically a glue-like paste (“klister” actually means “glue” across all the three Scandinavian countries). Klister is discouraging for amateurs, as it is very sticky, it is easy to apply but very difficult to remove.
Professionals often maintain that klister is best applied with the palm of the hand, the hand can be cleaned by placing it in a glove and waiting while the klister is mysteriously removed; amateurs often resort to some object of the appropriate size. Since klister is an organic chemical, a non-polar solvent (such as gasoline) or a soap is necessary to remove it. Stores often sell purpose-made solvent to clean skis. These should be used with care, as they are both flammable and toxic if inhaled.
Klister is also colour-coded, with red klister for wet snow and blue klister for icy snow.
Waxless skis
In recent years, waxless skies have carved a niche in the market among casual skiers. Waxless skis have a fish scale, cross-hatched or ridged pattern in the kick zone to provide grip. A waxless ski is inferior to a finely tuned waxed ski, but does not require the sometimes time-consuming and sometimes costly selection and application of kick wax or klister. However, they do require a glide wax to keep them sliding smoothly and protecting the surface from dirt and ice build-up. There are specialty liquid wax products on the market manufactured for this purpose; standard wax should never be applied to waxless skis due to extreme difficulty in later removing it from the grooved or notched kick zone.
Waxless skis are better suited to recreational skiers who simply want to get out on the trail with minimal time spent on maintenance, as they generally produce too much drag for competitive skiers.
Waxtape
An alternative for kick waxes is waxtapes; it’s a gluetape that is fasten at the kick zone. Tapes are replaced when they don’t give enough grip. Recreational skiers find tapes much easier to apply and last much longer then ordinary kick waxes. They are, however, harder to remove then ordinary kick waxes.
This guide is licensed under the GNU Free Documentation License. It uses material from the Wikipedia.
